main page     Air Pollution Prevention Facility 
 
 
 ㆍ Filtration dust collection system
 ㆍ Post wash dust collection system
 ㆍ Absorbing dust collection system
 ㆍ Centrifugal dust collection system
 ㆍVacuum Evaporation System
 ㆍMajor construction Performance
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Vacuum Evaporation System
Vacuum Evaporation System

Oxidation & combustion of VOC and various pollutants contained in the waste water
 
Manufacturer EQUBE Co.,LTD
   
Country of origin KOREAN
   
Treatment capacity 4200kg/hr (100 ton/day)
   
Treatment method Direct injection of waste water into the flame.
   
Application CSRTO, RTO, SCRUBBER, heat recovery system and post-treatment facility for high-concentration waste water such as organic solvent, thermo-hardening resin, aqueous cutting oil, waste water
   
 
 
 
 
ㆍPhone Inquiry +82-31-686-9610
ㆍE-mail Inquiry cs@eqube.co.kr
   
 
 
 
 
 
Vacuum Evaporation System
 

The system that separates pollutants from pure water by oxidation/combustion of VOCs and various pollutants contained in waste water through directly injecting waste water into the flame.

It is a suitable system for treating high-concentration waste water. It is also an energy saving facility, and when waste water flowing into No. 1 evaporator will be circulated by the pump and add temperature in evaporated condition, the evaporated steam is recycled as a necessary heat source through absorption, mixing and compression processes by a strong absorption power of the ejector formed at low level by high-pressure steam.
 
 
 
Major Information of Products
 
Advantage of the system
  Applicable to a variety of fields including recovery of valuable resources as well as seawater desalination
Suitable for treatment of high-concentration waste water. (Excellent in VOC treatment ability)
High treatment efficiency owing to waste water evaporation by circulation.
Mechanically compressing high-temperature steam and circulating the supply it as the heat source for evaporation purpose, resulting in energy reduction.
Less scales are generated inside the system owing to its pressurized injection by pump.
   
   
Calculation standard
  Treatment capacity : 4200kg/hr (100 ton/day)
Treated water/concentrate : 19:1 (concentrate generation rate: 5% of inflow volume)
Material : raw water contacting member (STS316), condensate water. Steam contacting member (STS304), heat exchanger tube (TiGr2), others (SS400+E.C)
Range : evaporation/condensation system (except boiler, cooling tower, etc.)
   
   
Major applications
 

Plant suffering the problem of VOCs emission.
Plant with difficulty in installation of other system for the reason of narrow workspace.
The workspace where waste water is difficult to be treated biologically, physically or chemically.
Plant seeking to have maximum waste water treatment with minimum expense.
Plant intending to reduce the consignment treatment expense.
   
   
 
 
 
 
Principle & structure
 
 
 
 
 
Design/installation of overall ventilation and local ventilation facilities
 
○ Facility Criteria
Facility related with the subject hazardous material under control (Article 168 of the Enforcement Rule) When business owner cause the worker to handle the work in his/her workplace where the subject hazardous material under control is used, the owner must install the facility or local exhaust system that prevent gas, steam or dust generating sources of the said hazardous material.
 
Material condition Controlling wind velocity (meter/second)
Gaseous substance 0.5
Granular substance 1.0
 
1. Controlling wind velocity means the wind velocity in case of all the hoods of local exhaust system being opened
2. In case of enclosing or booth type: Wind velocity of the hood at opening area
3. In case of exterior or receiver type hood: Wind velocity at the point farthest away from the opening area within the range where gas, steam or dust with hazardous property are sucked into
 
 
 
Business Negotiation Guide
 
 
Success Partner eQube growing together with clients.
 
 
We are eQube that is a corporation providing a differentiated value to customers and trusted by customers. eQube dust collector’s challenge toward the future will never stop.
 
 
 
 
1. Rapid selection and installation of dust collector optimized for the applicable work site

We produce and install dust collector customized for dust properties, work environment, local exhaust, capture flow rate, design, etc. and therefore you can use a dust collector optimized for the work site.
 
 
2. Real time based consultation through On/Off lines

We conduct the consultation on dust collection facility in detail through on-line and your site visit, and support you with consulting such as local exhaust design, quotation, proposal, etc.)
 
 
3. Correct A/S support and quick response to customers

Installation Support Team, A/S Support Team, etc. are performing customer’s satisfaction with top priority through quick response to customers, and will provide the customer with the value desired by the customer through best quality and service.)
 
 

 
System principle cut diameter
(㎛)		 dust collection
ratio(%)		 pressure
loss
(mmH₂O)		 1,000㎥/min applicable dust
concentration
(g/㎥)		 applicable condition
electric
power (Kw)		 required
quantity
(T/H)
BAG FILTER Filtration > 0.5
> 0.1		 90-99% 100-200 35-70 - 0.2-70
0.2-20		 Impossible to filtrate the dust containing strong adhesive property or large amount of moisture content
Gravity settling Gravity settling > 50   5-20       pre-treatment dust collection system
Inertial dust inertia > 20   35-50       pre-treatment dust collection system
Centrifugal Centrifugal > 10
> 3		 5-10㎛
40-75
75-95		 100-200 35-70 12-30 deflation 1-20
Wet 2-20		 dust containing a strong adhesive property
Multi
Cyclone		 Centrifuga > 2.55 95 100-200 35-70   1-20 dust containing a strong adhesive property
Venturi
cyclone		 humidified > 0.2 90-99 500-1,000 120-200 18-60 10 (Below) Requiring a joint use with wet cyclone
Electric dust
collection		 electrostatic > 0.05 90-99 2-25 20-60 0.9 2 (Below) Restrictions on the type
 
 
Home    Agency guide and recruitment   On-line quote    Notice & News
family site:   

EQube Co.,LTD / Business Number : 113-86-91553 / (Head office) #1318, B-Steelland, Jeongwang-dong, Siheung-si, Gyeonggi-do, Korea
Tel : +82-31-686-9610 / Fax :+82-31-686-9611 / E-mail : cs@eqube.co.kr / Representative Director : Jong-Hyun, Choi
(Seoul Office) #1006 Sungyeong B/D, 3, Gongwon-ro, Guro-gu, Seoul, Korea (Tel: +82-2-861-1553)
(Yeongnam Branch) 19, Baenamugol-gil, Gimcheon-si, Gyeongsangbuk-do, Korea (Tel: +82-54-436-1129)             
COPYRIGHT (C) 2014 EQUBE CO.,LTD. ALL RIGHT RESERVED.